TY - JOUR AU - Huang, J. M. Y. AU - Millis, J. M. PY - 2008 DA - 2008// TI - Government policy and organ transplantation in China JO - Lancet VL - 372 UR - https://doi.org/10.1016/S0140-6736(08)61359-8 DO - 10.1016/S0140-6736(08)61359-8 ID - Huang2008 ER - TY - JOUR AU - Zhang, Q. AU - Johnson, J. A. AU - Dunne, L. W. AU - Chen, Y. AU - Iyyanki, T. AU - Wu, Y. AU - Chang, E. I. AU - Branch-Brooks, C. D. AU - Robb, G. L. AU - Butler, C. E. PY - 2016 DA - 2016// TI - Decellularized skin/adipose tissue flap matrix for engineering vascularized composite soft tissue flaps JO - Acta Biomater VL - 35 UR - https://doi.org/10.1016/j.actbio.2016.02.017 DO - 10.1016/j.actbio.2016.02.017 ID - Zhang2016 ER - TY - JOUR AU - Futrega, K. AU - Palmer, J. S. AU - Kinney, M. AU - Lott, W. B. AU - Ungrin, M. D. AU - Zandstra, P. W. AU - Doran, M. R. PY - 2015 DA - 2015// TI - The microwell-mesh: a novel device and protocol for the high throughput manufacturing of cartilage microtissues JO - Biomaterials VL - 62 UR - https://doi.org/10.1016/j.biomaterials.2015.05.013 DO - 10.1016/j.biomaterials.2015.05.013 ID - Futrega2015 ER - TY - JOUR AU - Shamaz, B. H. AU - Anitha, A. AU - Vijayamohan, M. AU - Kuttappan, S. AU - Nair, S. AU - Nair, M. B. PY - 2015 DA - 2015// TI - Relevance of fiber integrated gelatin-nanohydroxyapatite composite scaffold for bone tissue regeneration JO - Nanotechnology VL - 26 UR - https://doi.org/10.1088/0957-4484/26/40/405101 DO - 10.1088/0957-4484/26/40/405101 ID - Shamaz2015 ER - TY - JOUR AU - Lee, C. H. AU - Lee, F. Y. AU - Tarafder, S. AU - Kao, K. AU - Jun, Y. AU - Yang, G. AU - Mao, J. J. PY - 2015 DA - 2015// TI - Harnessing endogenous stem/progenitor cells for tendon regeneration JO - J Clin Invest VL - 125 UR - https://doi.org/10.1172/JCI81589 DO - 10.1172/JCI81589 ID - Lee2015 ER - TY - JOUR AU - Thankam, F. G. AU - Muthu, J. PY - 2015 DA - 2015// TI - Alginate-polyester comacromer based hydrogels as physiochemically and biologically favorable entities for cardiac tissue engineering JO - J Colloid Interface Sci VL - 457 UR - https://doi.org/10.1016/j.jcis.2015.06.034 DO - 10.1016/j.jcis.2015.06.034 ID - Thankam2015 ER - TY - JOUR AU - Rouwkema, J. AU - Rivron, N. C. AU - Blitterswijk, C. A. PY - 2008 DA - 2008// TI - Vascularization in tissue engineering JO - Trends Biotechnol VL - 26 UR - https://doi.org/10.1016/j.tibtech.2008.04.009 DO - 10.1016/j.tibtech.2008.04.009 ID - Rouwkema2008 ER - TY - JOUR AU - Jones, A. C. AU - Arns, C. H. AU - Hutmacher, D. W. AU - Milthorpe, B. K. AU - Sheppard, A. P. AU - Knackstedt, M. A. PY - 2009 DA - 2009// TI - The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth JO - Biomaterials VL - 30 UR - https://doi.org/10.1016/j.biomaterials.2008.10.056 DO - 10.1016/j.biomaterials.2008.10.056 ID - Jones2009 ER - TY - JOUR AU - Hollister, S. J. AU - Maddox, R. D. AU - Taboas, J. M. PY - 2002 DA - 2002// TI - Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints JO - Biomaterials VL - 23 UR - https://doi.org/10.1016/S0142-9612(02)00148-5 DO - 10.1016/S0142-9612(02)00148-5 ID - Hollister2002 ER - TY - JOUR AU - Lee, J. AU - Cuddihy, M. J. AU - Kotov, N. A. PY - 2008 DA - 2008// TI - Three-dimensional cell culture matrices: state of the art JO - Tissue Eng Part B Rev VL - 14 UR - https://doi.org/10.1089/teb.2007.0150 DO - 10.1089/teb.2007.0150 ID - Lee2008 ER - TY - JOUR AU - Leong, K. F. AU - Chua, C. K. AU - Sudarmadji, N. AU - Yeong, W. Y. PY - 2008 DA - 2008// TI - Engineering functionally graded tissue engineering scaffolds JO - J Mech Behav Biomed Mater VL - 1 UR - https://doi.org/10.1016/j.jmbbm.2007.11.002 DO - 10.1016/j.jmbbm.2007.11.002 ID - Leong2008 ER - TY - JOUR AU - Zong, X. AU - Bien, H. AU - Chung, C. Y. AU - Yin, L. AU - Fang, D. AU - Hsiao, B. S. AU - Chu, B. AU - Entcheva, E. PY - 2005 DA - 2005// TI - Electrospun fine-textured scaffolds for heart tissue constructs JO - Biomaterials VL - 26 UR - https://doi.org/10.1016/j.biomaterials.2005.01.052 DO - 10.1016/j.biomaterials.2005.01.052 ID - Zong2005 ER - TY - JOUR AU - Moroni, L. AU - Wijn, J. R. AU - Blitterswijk, C. A. PY - 2006 DA - 2006// TI - 3D fiber-deposited scaffolds for tissue engineering: influence of pores geometry and architecture on dynamic mechanical properties JO - Biomaterials VL - 27 UR - https://doi.org/10.1016/j.biomaterials.2005.07.023 DO - 10.1016/j.biomaterials.2005.07.023 ID - Moroni2006 ER - TY - JOUR AU - Derby, B. PY - 2012 DA - 2012// TI - Printing and prototyping of tissues and scaffolds JO - Science VL - 338 UR - https://doi.org/10.1126/science.1226340 DO - 10.1126/science.1226340 ID - Derby2012 ER - TY - JOUR AU - Powers, M. K. AU - Lee, B. R. AU - Silberstein, J. PY - 2016 DA - 2016// TI - Three-dimensional printing of surgical anatomy JO - Curr Opin Urol VL - 26 UR - https://doi.org/10.1097/MOU.0000000000000274 DO - 10.1097/MOU.0000000000000274 ID - Powers2016 ER - TY - JOUR AU - Cui, X. AU - Breitenkamp, K. AU - Lotz, M. AU - D’Lima, D. PY - 2012 DA - 2012// TI - Synergistic action of fibroblast growth factor-2 and transforming growth factor-beta1 enhances bioprinted human neocartilage formation JO - Biotechnol Bioeng VL - 109 UR - https://doi.org/10.1002/bit.24488 DO - 10.1002/bit.24488 ID - Cui2012 ER - TY - JOUR AU - Poldervaart, M. T. AU - Wang, H. AU - Stok, J. AU - Weinans, H. AU - Leeuwenburgh, S. C. AU - Oner, F. C. AU - Dhert, W. J. AU - Alblas, J. PY - 2013 DA - 2013// TI - Sustained release of BMP-2 in bioprinted alginate for osteogenicity in mice and rats JO - PLoS ONE VL - 8 UR - https://doi.org/10.1371/journal.pone.0072610 DO - 10.1371/journal.pone.0072610 ID - Poldervaart2013 ER - TY - JOUR AU - Arslan-Yildiz, A. AU - Assal, R. E. AU - Chen, P. AU - Guven, S. AU - Inci, F. AU - Demirci, U. PY - 2016 DA - 2016// TI - Towards artificial tissue models: past, present, and future of 3D bioprinting JO - Biofabrication VL - 8 UR - https://doi.org/10.1088/1758-5090/8/1/014103 DO - 10.1088/1758-5090/8/1/014103 ID - Arslan-Yildiz2016 ER - TY - JOUR AU - Lee, S. Y. AU - Kim, H. J. AU - Choi, D. PY - 2015 DA - 2015// TI - Cell sources, liver support systems and liver tissue engineering: alternatives to liver transplantation JO - Int J Stem Cells VL - 8 UR - https://doi.org/10.15283/ijsc.2015.8.1.36 DO - 10.15283/ijsc.2015.8.1.36 ID - Lee2015 ER - TY - JOUR AU - Boland, T. AU - Xu, T. AU - Damon, B. AU - Cui, X. PY - 2006 DA - 2006// TI - Application of inkjet printing to tissue engineering JO - Biotechnol J VL - 1 UR - https://doi.org/10.1002/biot.200600081 DO - 10.1002/biot.200600081 ID - Boland2006 ER - TY - JOUR AU - Cui, X. AU - Dean, D. AU - Ruggeri, Z. M. AU - Boland, T. PY - 2010 DA - 2010// TI - Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells JO - Biotechnol Bioeng VL - 106 UR - https://doi.org/10.1002/bit.22762 DO - 10.1002/bit.22762 ID - Cui2010 ER - TY - JOUR AU - Murphy, S. V. AU - Atala, A. PY - 2014 DA - 2014// TI - 3D bioprinting of tissues and organs JO - Nat Biotechnol VL - 32 UR - https://doi.org/10.1038/nbt.2958 DO - 10.1038/nbt.2958 ID - Murphy2014 ER - TY - JOUR AU - Cui, X. AU - Boland, T. AU - D’Lima, D. D. AU - Lotz, M. K. PY - 2012 DA - 2012// TI - Thermal inkjet printing in tissue engineering and regenerative medicine JO - Recent Pat Drug Deliv Formul VL - 6 UR - https://doi.org/10.2174/187221112800672949 DO - 10.2174/187221112800672949 ID - Cui2012 ER - TY - JOUR AU - Jana, S. AU - Lerman, A. PY - 2015 DA - 2015// TI - Bioprinting a cardiac valve JO - Biotechnol Adv VL - 33 UR - https://doi.org/10.1016/j.biotechadv.2015.07.006 DO - 10.1016/j.biotechadv.2015.07.006 ID - Jana2015 ER - TY - JOUR AU - Nakamura, M. AU - Kobayashi, A. AU - Takagi, F. AU - Watanabe, A. AU - Hiruma, Y. AU - Ohuchi, K. AU - Iwasaki, Y. AU - Horie, M. AU - Morita, I. AU - Takatani, S. PY - 2005 DA - 2005// TI - Biocompatible inkjet printing technique for designed seeding of individual living cells JO - Tissue Eng VL - 11 UR - https://doi.org/10.1089/ten.2005.11.1658 DO - 10.1089/ten.2005.11.1658 ID - Nakamura2005 ER - TY - JOUR AU - Saunders, R. E. AU - Gough, J. E. AU - Derby, B. PY - 2008 DA - 2008// TI - Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing JO - Biomaterials VL - 29 UR - https://doi.org/10.1016/j.biomaterials.2007.09.032 DO - 10.1016/j.biomaterials.2007.09.032 ID - Saunders2008 ER - TY - STD TI - Seetharam R, Sharma SK. Purification and analysis of recombinant proteins. Biotechnology and Bioprocessing, vol 12. CRC Press; 1991. ID - ref27 ER - TY - JOUR AU - Okamoto, T. AU - Suzuki, T. AU - Yamamoto, N. PY - 2000 DA - 2000// TI - Microarray fabrication with covalent attachment of DNA using bubble jet technology JO - Nat Biotechnol VL - 18 UR - https://doi.org/10.1038/74507 DO - 10.1038/74507 ID - Okamoto2000 ER - TY - JOUR AU - Xu, T. AU - Jin, J. AU - Gregory, C. AU - Hickman, J. J. AU - Boland, T. PY - 2005 DA - 2005// TI - Inkjet printing of viable mammalian cells JO - Biomaterials VL - 26 UR - https://doi.org/10.1016/j.biomaterials.2004.04.011 DO - 10.1016/j.biomaterials.2004.04.011 ID - Xu2005 ER - TY - JOUR AU - Duan, B. AU - Hockaday, L. A. AU - Kang, K. H. AU - Butcher, J. T. PY - 2013 DA - 2013// TI - 3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels JO - J Biomed Mater Res A VL - 101 UR - https://doi.org/10.1002/jbm.a.34420 DO - 10.1002/jbm.a.34420 ID - Duan2013 ER - TY - JOUR AU - Hockaday, L. A. AU - Kang, K. H. AU - Colangelo, N. W. AU - Cheung, P. Y. AU - Duan, B. AU - Malone, E. AU - Wu, J. AU - Girardi, L. N. AU - Bonassar, L. J. AU - Lipson, H. PY - 2012 DA - 2012// TI - Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds JO - Biofabrication VL - 4 UR - https://doi.org/10.1088/1758-5082/4/3/035005 DO - 10.1088/1758-5082/4/3/035005 ID - Hockaday2012 ER - TY - JOUR AU - Chia, H. N. AU - Wu, B. M. PY - 2015 DA - 2015// TI - Recent advances in 3D printing of biomaterials JO - J Biol Eng VL - 9 UR - https://doi.org/10.1186/s13036-015-0001-4 DO - 10.1186/s13036-015-0001-4 ID - Chia2015 ER - TY - JOUR AU - Chien, K. B. AU - Makridakis, E. AU - Shah, R. N. PY - 2013 DA - 2013// TI - Three-dimensional printing of soy protein scaffolds for tissue regeneration JO - Tissue Eng Part C Methods VL - 19 UR - https://doi.org/10.1089/ten.tec.2012.0383 DO - 10.1089/ten.tec.2012.0383 ID - Chien2013 ER - TY - JOUR AU - Fedorovich, N. E. AU - Schuurman, W. AU - Wijnberg, H. M. AU - Prins, H. J. AU - Weeren, P. R. AU - Malda, J. AU - Alblas, J. AU - Dhert, W. J. PY - 2012 DA - 2012// TI - Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds JO - Tissue Eng Part C Methods VL - 18 UR - https://doi.org/10.1089/ten.tec.2011.0060 DO - 10.1089/ten.tec.2011.0060 ID - Fedorovich2012 ER - TY - JOUR AU - Fedorovich, N. E. AU - Wijnberg, H. M. AU - Dhert, W. J. AU - Alblas, J. PY - 2011 DA - 2011// TI - Distinct tissue formation by heterogeneous printing of osteo- and endothelial progenitor cells JO - Tissue Eng Part A VL - 17 UR - https://doi.org/10.1089/ten.tea.2011.0019 DO - 10.1089/ten.tea.2011.0019 ID - Fedorovich2011 ER - TY - JOUR AU - Catros, S. AU - Fricain, J. C. AU - Guillotin, B. AU - Pippenger, B. AU - Bareille, R. AU - Remy, M. AU - Lebraud, E. AU - Desbat, B. AU - Amedee, J. AU - Guillemot, F. PY - 2011 DA - 2011// TI - Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite JO - Biofabrication VL - 3 UR - https://doi.org/10.1088/1758-5082/3/2/025001 DO - 10.1088/1758-5082/3/2/025001 ID - Catros2011 ER - TY - STD TI - Trombetta R, Inzana J, Schwarz EM, Kates SL, Awad HA. 3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery. Ann Biomed Eng. 2016. doi:10.1007/s10439-016-1678-3. ID - ref37 ER - TY - JOUR AU - Guillemot, F. AU - Souquet, A. AU - Catros, S. AU - Guillotin, B. PY - 2010 DA - 2010// TI - Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering JO - Nanomedicine VL - 5 UR - https://doi.org/10.2217/nnm.10.14 DO - 10.2217/nnm.10.14 ID - Guillemot2010 ER - TY - JOUR AU - Guillemot, F. AU - Souquet, A. AU - Catros, S. AU - Guillotin, B. AU - Lopez, J. AU - Faucon, M. PY - 2010 DA - 2010// TI - Highthroughput laser printing of cells and biomaterials for tissue engineering JO - Acta Biomater VL - 6 UR - https://doi.org/10.1016/j.actbio.2009.09.029 DO - 10.1016/j.actbio.2009.09.029 ID - Guillemot2010 ER - TY - JOUR AU - Barron, J. A. AU - Wu, P. AU - Ladouceur, H. D. AU - Ringeisen, B. R. PY - 2004 DA - 2004// TI - Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns JO - Biomed Microdevices VL - 6 UR - https://doi.org/10.1023/B:BMMD.0000031751.67267.9f DO - 10.1023/B:BMMD.0000031751.67267.9f ID - Barron2004 ER - TY - JOUR AU - Ringeisen, B. R. AU - Kim, H. AU - Barron, J. A. AU - Krizman, D. B. AU - Chrisey, D. B. AU - Jackman, S. AU - Auyeung, R. Y. AU - Spargo, B. J. PY - 2004 DA - 2004// TI - Laser printing of pluripotent embryonal carcinoma cells JO - Tissue Eng VL - 10 UR - https://doi.org/10.1089/107632704323061843 DO - 10.1089/107632704323061843 ID - Ringeisen2004 ER - TY - JOUR AU - Michael, S. AU - Sorg, H. AU - Peck, C. T. AU - Koch, L. AU - Deiwick, A. AU - Chichkov, B. AU - Vogt, P. M. AU - Reimers, K. PY - 2013 DA - 2013// TI - Tissue engineered skin substitutes created by laser-assisted bioprinting form skin-like structures in the dorsal skin fold chamber in mice JO - PLoS ONE VL - 8 UR - https://doi.org/10.1371/journal.pone.0057741 DO - 10.1371/journal.pone.0057741 ID - Michael2013 ER - TY - JOUR AU - Serra, P. AU - Duocastella, M. AU - Fernández-Pradas, J. M. AU - Morenza, J. L. PY - 2009 DA - 2009// TI - Liquids microprinting through laser-induced forward transfer JO - Appl Surf Sci VL - 255 UR - https://doi.org/10.1016/j.apsusc.2008.07.200 DO - 10.1016/j.apsusc.2008.07.200 ID - Serra2009 ER - TY - JOUR AU - Patrascioiu, A. AU - Fernández-Pradas, J. M. AU - Palla-Papavlu, A. AU - Morenza, J. L. AU - Serra, P. PY - 2014 DA - 2014// TI - Laser-generated liquid microjets: correlation between bubble dynamics and liquid ejection JO - Microfluidics Nanofluidics VL - 16 UR - https://doi.org/10.1007/s10404-013-1218-5 DO - 10.1007/s10404-013-1218-5 ID - Patrascioiu2014 ER - TY - JOUR AU - Ali, M. AU - Pages, E. AU - Ducom, A. AU - Fontaine, A. AU - Guillemot, F. PY - 2014 DA - 2014// TI - Controlling laser-induced jet formation for bioprinting mesenchymal stem cells with high viability and high resolution JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/4/045001 DO - 10.1088/1758-5082/6/4/045001 ID - Ali2014 ER - TY - JOUR AU - Melchels, F. P. AU - Feijen, J. AU - Grijpma, D. W. PY - 2010 DA - 2010// TI - A review on stereolithography and its applications in biomedical engineering JO - Biomaterials VL - 31 UR - https://doi.org/10.1016/j.biomaterials.2010.04.050 DO - 10.1016/j.biomaterials.2010.04.050 ID - Melchels2010 ER - TY - JOUR AU - Wang, Z. AU - Abdulla, R. AU - Parker, B. AU - Samanipour, R. AU - Ghosh, S. AU - Kim, K. PY - 2015 DA - 2015// TI - A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks JO - Biofabrication VL - 7 UR - https://doi.org/10.1088/1758-5090/7/4/045009 DO - 10.1088/1758-5090/7/4/045009 ID - Wang2015 ER - TY - JOUR AU - Khatiwala, C. AU - Law, R. AU - Shepherd, B. AU - Dorfman, S. AU - Csete, M. PY - 2012 DA - 2012// TI - 3D cell bioprinting for regenerative medicine research and therapies JO - Gene Ther VL - 7 ID - Khatiwala2012 ER - TY - JOUR AU - Tasoglu, S. AU - Demirci, U. PY - 2013 DA - 2013// TI - Bioprinting for stem cell research JO - Trends Biotechnol VL - 31 UR - https://doi.org/10.1016/j.tibtech.2012.10.005 DO - 10.1016/j.tibtech.2012.10.005 ID - Tasoglu2013 ER - TY - JOUR AU - Nicodemus, G. D. AU - Bryant, S. J. PY - 2008 DA - 2008// TI - Cell encapsulation in biodegradable hydrogels for tissue engineering applications JO - Tissue Eng Part B Rev VL - 14 UR - https://doi.org/10.1089/ten.teb.2007.0332 DO - 10.1089/ten.teb.2007.0332 ID - Nicodemus2008 ER - TY - JOUR AU - Wust, S. AU - Godla, M. E. AU - Muller, R. AU - Hofmann, S. PY - 2014 DA - 2014// TI - Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting JO - Acta Biomater VL - 10 UR - https://doi.org/10.1016/j.actbio.2013.10.016 DO - 10.1016/j.actbio.2013.10.016 ID - Wust2014 ER - TY - JOUR AU - Matsiko, A. AU - Gleeson, J. P. AU - O’Brien, F. J. PY - 2015 DA - 2015// TI - Scaffold mean pore size influences mesenchymal stem cell chondrogenic differentiation and matrix deposition JO - Tissue Eng Part A VL - 21 UR - https://doi.org/10.1089/ten.tea.2013.0545 DO - 10.1089/ten.tea.2013.0545 ID - Matsiko2015 ER - TY - JOUR AU - Domingos, M. AU - Intranuovo, F. AU - Russo, T. AU - Santis, R. AU - Gloria, A. AU - Ambrosio, L. AU - Ciurana, J. AU - Bartolo, P. PY - 2013 DA - 2013// TI - The first systematic analysis of 3D rapid prototyped poly(epsilon-caprolactone) scaffolds manufactured through BioCell printing: the effect of pore size and geometry on compressive mechanical behaviour and in vitro hMSC viability JO - Biofabrication VL - 5 UR - https://doi.org/10.1088/1758-5082/5/4/045004 DO - 10.1088/1758-5082/5/4/045004 ID - Domingos2013 ER - TY - JOUR AU - Lou, T. AU - Wang, X. AU - Song, G. AU - Gu, Z. AU - Yang, Z. PY - 2015 DA - 2015// TI - Structure and properties of PLLA/beta-TCP nanocomposite scaffolds for bone tissue engineering JO - J Mater Sci Mater Med VL - 26 UR - https://doi.org/10.1007/s10856-014-5366-2 DO - 10.1007/s10856-014-5366-2 ID - Lou2015 ER - TY - JOUR AU - Nadeem, D. AU - Smith, C. A. AU - Dalby, M. J. AU - Meek, R. M. AU - Lin, S. AU - Li, G. AU - Su, B. PY - 2015 DA - 2015// TI - Three-dimensional CaP/gelatin lattice scaffolds with integrated osteoinductive surface topographies for bone tissue engineering JO - Biofabrication VL - 7 UR - https://doi.org/10.1088/1758-5090/7/1/015005 DO - 10.1088/1758-5090/7/1/015005 ID - Nadeem2015 ER - TY - JOUR AU - Yao, Q. AU - Wei, B. AU - Guo, Y. AU - Jin, C. AU - Du, X. AU - Yan, C. AU - Yan, J. AU - Hu, W. AU - Xu, Y. AU - Zhou, Z. PY - 2015 DA - 2015// TI - Design, construction and mechanical testing of digital 3D anatomical data-based PCL-HA bone tissue engineering scaffold JO - J Mater Sci Mater Med VL - 26 UR - https://doi.org/10.1007/s10854-015-3080-6 DO - 10.1007/s10854-015-3080-6 ID - Yao2015 ER - TY - JOUR AU - Leonardi, E. AU - Ciapetti, G. AU - Baldini, N. AU - Novajra, G. AU - Verne, E. AU - Baino, F. AU - Vitale-Brovarone, C. PY - 2010 DA - 2010// TI - Response of human bone marrow stromal cells to a resorbable P(2)O(5)-SiO(2)-CaO-MgO-Na(2)O-K(2)O phosphate glass ceramic for tissue engineering applications JO - Acta Biomater VL - 6 UR - https://doi.org/10.1016/j.actbio.2009.07.017 DO - 10.1016/j.actbio.2009.07.017 ID - Leonardi2010 ER - TY - STD TI - Jose RR, Rodriguez MJ, Dixon TA, Omenetto F, Kaplan DL. Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting. ACS Biomater Sci Eng 2016. doi:10.1021/acsbiomaterials.6b00088. ID - ref58 ER - TY - JOUR AU - Hinton, T. J. AU - Jallerat, Q. AU - Palchesko, R. N. AU - Park, J. H. AU - Grodzicki, M. S. AU - Shue, H. J. AU - Ramadan, M. H. AU - Hudson, A. R. AU - Feinberg, A. W. PY - 2015 DA - 2015// TI - Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels JO - Sci Adv VL - 1 UR - https://doi.org/10.1126/sciadv.1500758 DO - 10.1126/sciadv.1500758 ID - Hinton2015 ER - TY - JOUR AU - Duffy, R. M. S. Y. AU - Feinberg, A. W. PY - 2016 DA - 2016// TI - Understanding the role of ECM protein composition and geometric micropatterning for engineering human skeletal muscle JO - Ann Biomed Eng VL - 44 UR - https://doi.org/10.1007/s10439-016-1592-8 DO - 10.1007/s10439-016-1592-8 ID - Duffy2016 ER - TY - STD TI - Guvendiren M, Molde J, Soares RMD, Kohn J. Designing biomaterials for 3D printing. ACS Biomater Sci Eng; 2016. doi:10.1021/acsbiomaterials.6b00121. ID - ref61 ER - TY - JOUR AU - Bertassoni, L. E. AU - Cardoso, J. C. AU - Manoharan, V. AU - Cristino, A. L. AU - Bhise, N. S. AU - Araujo, W. A. AU - Zorlutuna, P. AU - Vrana, N. E. AU - Ghaemmaghami, A. M. AU - Dokmeci, M. R. AU - Khademhosseini, A. PY - 2014 DA - 2014// TI - Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/2/024105 DO - 10.1088/1758-5082/6/2/024105 ID - Bertassoni2014 ER - TY - JOUR AU - Neufurth, M. AU - Wang, X. AU - Schroder, H. C. AU - Feng, Q. AU - Diehl-Seifert, B. AU - Ziebart, T. AU - Steffen, R. AU - Wang, S. AU - Muller, W. E. PY - 2014 DA - 2014// TI - Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells JO - Biomaterials VL - 35 UR - https://doi.org/10.1016/j.biomaterials.2014.07.002 DO - 10.1016/j.biomaterials.2014.07.002 ID - Neufurth2014 ER - TY - JOUR AU - Lorber, B. AU - Hsiao, W. K. AU - Hutchings, I. M. AU - Martin, K. R. PY - 2014 DA - 2014// TI - Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/1/015001 DO - 10.1088/1758-5082/6/1/015001 ID - Lorber2014 ER - TY - JOUR AU - Levato, R. AU - Visser, J. AU - Planell, J. A. AU - Engel, E. AU - Malda, J. AU - Mateos-Timoneda, M. A. PY - 2014 DA - 2014// TI - Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/3/035020 DO - 10.1088/1758-5082/6/3/035020 ID - Levato2014 ER - TY - JOUR AU - Duarte Campos, D. F. AU - Blaeser, A. AU - Weber, M. AU - Jakel, J. AU - Neuss, S. AU - Jahnen-Dechent, W. AU - Fischer, H. PY - 2013 DA - 2013// TI - Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid JO - Biofabrication VL - 5 UR - https://doi.org/10.1088/1758-5082/5/1/015003 DO - 10.1088/1758-5082/5/1/015003 ID - Duarte Campos2013 ER - TY - JOUR AU - Gruene, M. AU - Deiwick, A. AU - Koch, L. AU - Schlie, S. AU - Unger, C. AU - Hofmann, N. AU - Bernemann, I. AU - Glasmacher, B. AU - Chichkov, B. PY - 2011 DA - 2011// TI - Laser printing of stem cells for biofabrication of scaffold-free autologous grafts JO - Tissue Eng Part C Methods VL - 17 UR - https://doi.org/10.1089/ten.tec.2010.0359 DO - 10.1089/ten.tec.2010.0359 ID - Gruene2011 ER - TY - JOUR AU - Lin, H. AU - Zhang, D. AU - Alexander, P. G. AU - Yang, G. AU - Tan, J. AU - Cheng, A. W. AU - Tuan, R. S. PY - 2013 DA - 2013// TI - Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture JO - Biomaterials VL - 34 UR - https://doi.org/10.1016/j.biomaterials.2012.09.048 DO - 10.1016/j.biomaterials.2012.09.048 ID - Lin2013 ER - TY - JOUR AU - Moon, S. AU - Kim, Y. -. G. AU - Dong, L. AU - Lombardi, M. AU - Haeggstrom, E. AU - Jensen, R. V. AU - Hsiao, L. -. L. AU - Demirci, U. PY - 2011 DA - 2011// TI - Drop-on-demand single cell isolation and total RNA analysis JO - PLoS ONE VL - 6 UR - https://doi.org/10.1371/journal.pone.0017455 DO - 10.1371/journal.pone.0017455 ID - Moon2011 ER - TY - JOUR AU - Ma, Z. AU - Liu, Q. AU - Yang, H. AU - Runyan, R. B. AU - Eisenberg, C. A. AU - Xu, M. AU - Borg, T. K. AU - Markwald, R. AU - Wang, Y. AU - Gao, B. Z. PY - 2013 DA - 2013// TI - Laser patterning for the study of MSC cardiogenic differentiation at the single-cell level JO - Light Sci Appl VL - 2 UR - https://doi.org/10.1038/lsa.2013.24 DO - 10.1038/lsa.2013.24 ID - Ma2013 ER - TY - JOUR AU - Dinh, N. D. AU - Chiang, Y. Y. AU - Hardelauf, H. AU - Baumann, J. AU - Jackson, E. AU - Waide, S. AU - Sisnaiske, J. AU - Frimat, J. P. AU - Thriel, C. AU - Janasek, D. PY - 2013 DA - 2013// TI - Microfluidic construction of minimalistic neuronal co-cultures JO - Lab Chip VL - 13 UR - https://doi.org/10.1039/c3lc41224e DO - 10.1039/c3lc41224e ID - Dinh2013 ER - TY - JOUR AU - Roth, E. A. AU - Xu, T. AU - Das, M. AU - Gregory, C. AU - Hickman, J. J. AU - Boland, T. PY - 2004 DA - 2004// TI - Inkjet printing for high-throughput cell patterning JO - Biomaterials VL - 25 UR - https://doi.org/10.1016/j.biomaterials.2003.10.052 DO - 10.1016/j.biomaterials.2003.10.052 ID - Roth2004 ER - TY - JOUR AU - Campbell, P. G. AU - Miller, E. D. AU - Fisher, G. W. AU - Walker, L. M. AU - Weiss, L. E. PY - 2005 DA - 2005// TI - Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization JO - Biomaterials VL - 26 UR - https://doi.org/10.1016/j.biomaterials.2005.04.032 DO - 10.1016/j.biomaterials.2005.04.032 ID - Campbell2005 ER - TY - JOUR AU - Skardal, A. AU - Zhang, J. AU - Prestwich, G. D. PY - 2010 DA - 2010// TI - Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates JO - Biomaterials VL - 31 UR - https://doi.org/10.1016/j.biomaterials.2010.04.045 DO - 10.1016/j.biomaterials.2010.04.045 ID - Skardal2010 ER - TY - JOUR AU - Beyersdorf, F. PY - 2014 DA - 2014// TI - Three-dimensional bioprinting: new horizon for cardiac surgery JO - Eur J Cardiothorac Surg VL - 46 UR - https://doi.org/10.1093/ejcts/ezu305 DO - 10.1093/ejcts/ezu305 ID - Beyersdorf2014 ER - TY - JOUR AU - Sawkins, M. J. AU - Mistry, P. AU - Brown, B. N. AU - Shakesheff, K. M. AU - Bonassar, L. J. AU - Yang, J. PY - 2015 DA - 2015// TI - Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair JO - Biofabrication VL - 7 UR - https://doi.org/10.1088/1758-5090/7/3/035004 DO - 10.1088/1758-5090/7/3/035004 ID - Sawkins2015 ER - TY - JOUR AU - Markstedt, K. AU - Mantas, A. AU - Tournier, I. AU - Martinez Avila, H. AU - Hagg, D. AU - Gatenholm, P. PY - 2015 DA - 2015// TI - 3D bioprinting human chondrocytes with nanocellulose-alginate bioink for cartilage tissue engineering applications JO - Biomacromolecules VL - 16 UR - https://doi.org/10.1021/acs.biomac.5b00188 DO - 10.1021/acs.biomac.5b00188 ID - Markstedt2015 ER - TY - JOUR AU - Bernhard, J. C. AU - Isotani, S. AU - Matsugasumi, T. AU - Duddalwar, V. AU - Hung, A. J. AU - Suer, E. AU - Baco, E. AU - Satkunasivam, R. AU - Djaladat, H. AU - Metcalfe, C. PY - 2016 DA - 2016// TI - Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education JO - World J Urol VL - 34 UR - https://doi.org/10.1007/s00345-015-1632-2 DO - 10.1007/s00345-015-1632-2 ID - Bernhard2016 ER - TY - JOUR AU - Skardal, A. AU - Mack, D. AU - Kapetanovic, E. AU - Atala, A. AU - Jackson, J. D. AU - Yoo, J. AU - Soker, S. PY - 2012 DA - 2012// TI - Bioprinted amniotic fluid-derived stem cells accelerate healing of large skin wounds JO - Stem Cells Transl Med VL - 1 UR - https://doi.org/10.5966/sctm.2012-0088 DO - 10.5966/sctm.2012-0088 ID - Skardal2012 ER - TY - STD TI - Go AS, Mozaffarian D, Roger VL, Benjamin EJ, Berry JD, Borden WB, Bravata DM, Dai S, Ford ES, Fox CS, Franco S, Fullerton HJ, Gillespie C, Hailpern SM, Heit JA, Howard VJ, Huffman MD, Kissela BM, Kittner SJ, Lackland DT, Lichtman JH, Lisabeth LD, Magid D, Marcus GM, Marelli A, Matchar DB, McGuire DK, Mohler ER, Moy CS, Mussolino ME, Nichol G, Paynter NP, Schreiner PJ, Sorlie PD, Stein J, Turan TN, Virani SS, Wong ND, Woo D, Turner MB, American Heart Association Statistics Committee and Stroke Statistics Subcommittee. Heart disease and stroke statistics—2013 update: a report from the American Heart Association. Circulation. 2012;127:e6–245. doi:10.1161/CIR.0b013e31828124ad. ID - ref80 ER - TY - JOUR AU - Bertassoni, L. E. AU - Cecconi, M. AU - Manoharan, V. AU - Nikkhah, M. AU - Hjortnaes, J. AU - Cristino, A. L. AU - Barabaschi, G. AU - Demarchi, D. AU - Dokmeci, M. R. AU - Yang, Y. AU - Khademhosseini, A. PY - 2014 DA - 2014// TI - Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs JO - Lab Chip VL - 14 UR - https://doi.org/10.1039/C4LC00030G DO - 10.1039/C4LC00030G ID - Bertassoni2014 ER - TY - JOUR AU - Kolesky, D. B. AU - Truby, R. L. AU - Gladman, A. S. AU - Busbee, T. A. AU - Homan, K. A. AU - Lewis, J. A. PY - 2014 DA - 2014// TI - 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs JO - Adv Mater VL - 26 UR - https://doi.org/10.1002/adma.201305506 DO - 10.1002/adma.201305506 ID - Kolesky2014 ER - TY - JOUR AU - Duan, B. AU - Kapetanovic, E. AU - Hockaday, L. A. AU - Butcher, J. T. PY - 2014 DA - 2014// TI - Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells JO - Acta Biomater VL - 10 UR - https://doi.org/10.1016/j.actbio.2013.12.005 DO - 10.1016/j.actbio.2013.12.005 ID - Duan2014 ER - TY - JOUR AU - Chen, W. AU - Zhou, H. AU - Tang, M. AU - Weir, M. D. AU - Bao, C. AU - Xu, H. H. PY - 2012 DA - 2012// TI - Gas-foaming calcium phosphate cement scaffold encapsulating human umbilical cord stem cells JO - Tissue Eng Part A VL - 18 UR - https://doi.org/10.1089/ten.tea.2011.0267 DO - 10.1089/ten.tea.2011.0267 ID - Chen2012 ER - TY - JOUR AU - Thein-Han, W. AU - Xu, H. H. PY - 2013 DA - 2013// TI - Prevascularization of a gas-foaming macroporous calcium phosphate cement scaffold via coculture of human umbilical vein endothelial cells and osteoblasts JO - Tissue Eng Part A VL - 19 UR - https://doi.org/10.1089/ten.tea.2012.0631 DO - 10.1089/ten.tea.2012.0631 ID - Thein-Han2013 ER - TY - JOUR AU - Kim, T. G. AU - Chung, H. J. AU - Park, T. G. PY - 2008 DA - 2008// TI - Macroporous and nanofibrous hyaluronic acid/collagen hybrid scaffold fabricated by concurrent electrospinning and deposition/leaching of salt particles JO - Acta Biomater VL - 4 UR - https://doi.org/10.1016/j.actbio.2008.06.008 DO - 10.1016/j.actbio.2008.06.008 ID - Kim2008 ER - TY - JOUR AU - Mehrabanian, M. AU - Nasr-Esfahani, M. PY - 2011 DA - 2011// TI - HA/nylon 6,6 porous scaffolds fabricated by salt-leaching/solvent casting technique: effect of nano-sized filler content on scaffold properties JO - Int J Nanomedicine VL - 6 ID - Mehrabanian2011 ER - TY - JOUR AU - Gercek, I. AU - Tigli, R. S. AU - Gumusderelioglu, M. PY - 2008 DA - 2008// TI - A novel scaffold based on formation and agglomeration of PCL microbeads by freeze-drying JO - J Biomed Mater Res A VL - 86 UR - https://doi.org/10.1002/jbm.a.31723 DO - 10.1002/jbm.a.31723 ID - Gercek2008 ER - TY - JOUR AU - Alizadeh, M. AU - Abbasi, F. AU - Khoshfetrat, A. B. AU - Ghaleh, H. PY - 2013 DA - 2013// TI - Microstructure and characteristic properties of gelatin/chitosan scaffold prepared by a combined freeze-drying/leaching method JO - Mater Sci Eng C Mater Biol Appl VL - 33 UR - https://doi.org/10.1016/j.msec.2013.05.039 DO - 10.1016/j.msec.2013.05.039 ID - Alizadeh2013 ER - TY - JOUR AU - Castilho, M. AU - Moseke, C. AU - Ewald, A. AU - Gbureck, U. AU - Groll, J. AU - Pires, I. AU - Tessmar, J. AU - Vorndran, E. PY - 2014 DA - 2014// TI - Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/1/015006 DO - 10.1088/1758-5082/6/1/015006 ID - Castilho2014 ER - TY - JOUR AU - Gao, G. AU - Schilling, A. F. AU - Yonezawa, T. AU - Wang, J. AU - Dai, G. AU - Cui, X. PY - 2014 DA - 2014// TI - Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells JO - Biotechnol J VL - 9 UR - https://doi.org/10.1002/biot.201400305 DO - 10.1002/biot.201400305 ID - Gao2014 ER - TY - JOUR AU - Park, J. Y. AU - Choi, J. C. AU - Shim, J. H. AU - Lee, J. S. AU - Park, H. AU - Kim, S. W. AU - Doh, J. AU - Cho, D. W. PY - 2014 DA - 2014// TI - A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting JO - Biofabrication VL - 6 UR - https://doi.org/10.1088/1758-5082/6/3/035004 DO - 10.1088/1758-5082/6/3/035004 ID - Park2014 ER - TY - JOUR AU - Lee, V. AU - Singh, G. AU - Trasatti, J. P. AU - Bjornsson, C. AU - Xu, X. AU - Tran, T. N. AU - Yoo, S. S. AU - Dai, G. AU - Karande, P. PY - 2014 DA - 2014// TI - Design and fabrication of human skin by three-dimensional bioprinting JO - Tissue Eng Part C Methods VL - 20 UR - https://doi.org/10.1089/ten.tec.2013.0335 DO - 10.1089/ten.tec.2013.0335 ID - Lee2014 ER - TY - JOUR AU - Zein, N. N. AU - Hanouneh, I. A. AU - Bishop, P. D. AU - Samaan, M. AU - Eghtesad, B. AU - Quintini, C. AU - Miller, C. AU - Yerian, L. AU - Klatte, R. PY - 2013 DA - 2013// TI - Three-dimensional print of a liver for preoperative planning in living donor liver transplantation JO - Liver Transpl VL - 19 UR - https://doi.org/10.1002/lt.23729 DO - 10.1002/lt.23729 ID - Zein2013 ER - TY - JOUR AU - Bale, S. S. AU - Vernetti, L. AU - Senutovitch, N. AU - Jindal, R. AU - Hegde, M. AU - Gough, A. AU - McCarty, W. J. AU - Bakan, A. AU - Bhushan, A. AU - Shun, T. Y. PY - 2014 DA - 2014// TI - In vitro platforms for evaluating liver toxicity JO - Exp Biol Med VL - 239 UR - https://doi.org/10.1177/1535370214531872 DO - 10.1177/1535370214531872 ID - Bale2014 ER - TY - JOUR AU - Ikegami, T. AU - Maehara, Y. PY - 2013 DA - 2013// TI - Transplantation: 3D printing of the liver in living donor liver transplantation JO - Nat Rev Gastroenterol Hepatol VL - 10 UR - https://doi.org/10.1038/nrgastro.2013.195 DO - 10.1038/nrgastro.2013.195 ID - Ikegami2013 ER - TY - JOUR AU - Nakao, Y. AU - Kimura, H. AU - Sakai, Y. AU - Fujii, T. PY - 2011 DA - 2011// TI - Bile canaliculi formation by aligning rat primary hepatocytes in a microfluidic device JO - Biomicrofluidics VL - 5 UR - https://doi.org/10.1063/1.3580753 DO - 10.1063/1.3580753 ID - Nakao2011 ER - TY - JOUR AU - Skardal, A. AU - Smith, L. AU - Bharadwaj, S. AU - Atala, A. AU - Soker, S. AU - Zhang, Y. PY - 2012 DA - 2012// TI - Tissue specific synthetic ECM hydrogels for 3D in vitro maintenance of hepatocyte function JO - Biomaterials VL - 33 UR - https://doi.org/10.1016/j.biomaterials.2012.03.034 DO - 10.1016/j.biomaterials.2012.03.034 ID - Skardal2012 ER - TY - JOUR AU - Chang, R. AU - Emami, K. AU - Wu, H. AU - Sun, W. PY - 2010 DA - 2010// TI - Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model JO - Biofabrication VL - 2 UR - https://doi.org/10.1088/1758-5082/2/4/045004 DO - 10.1088/1758-5082/2/4/045004 ID - Chang2010 ER - TY - JOUR AU - Zhu, M. Z. J. PY - 2016 DA - 2016// TI - Three-dimensional printing of cerium-incorporated mesoporous calcium-silicate scaffolds for bone repair JO - J Mater Sci VL - 51 UR - https://doi.org/10.1007/s10853-015-9406-1 DO - 10.1007/s10853-015-9406-1 ID - Zhu2016 ER - TY - JOUR AU - Chang, R. C. AU - Emami, K. AU - Jeevarajan, A. AU - Wu, H. AU - Sun, W. PY - 2011 DA - 2011// TI - Microprinting of liver micro-organ for drug metabolism study JO - Methods Mol Biol VL - 671 UR - https://doi.org/10.1007/978-1-59745-551-0_13 DO - 10.1007/978-1-59745-551-0_13 ID - Chang2011 ER - TY - JOUR AU - Chien, K. B. AU - Aguado, B. A. AU - Bryce, P. J. AU - Shah, R. N. PY - 2013 DA - 2013// TI - In vivo acute and humoral response to three-dimensional porous soy protein scaffolds JO - Acta Biomater VL - 9 UR - https://doi.org/10.1016/j.actbio.2013.07.005 DO - 10.1016/j.actbio.2013.07.005 ID - Chien2013 ER - TY - JOUR AU - Haberstroh, K. AU - Ritter, K. AU - Kuschnierz, J. AU - Bormann, K. H. AU - Kaps, C. AU - Carvalho, C. AU - Mulhaupt, R. AU - Sittinger, M. AU - Gellrich, N. C. PY - 2010 DA - 2010// TI - Bone repair by cell-seeded 3D-bioplotted composite scaffolds made of collagen treated tricalciumphosphate or tricalciumphosphate-chitosan-collagen hydrogel or PLGA in ovine critical-sized calvarial defects JO - J Biomed Mater Res B Appl Biomater VL - 93 UR - https://doi.org/10.1002/jbm.b.31611 DO - 10.1002/jbm.b.31611 ID - Haberstroh2010 ER - TY - JOUR AU - Lim, T. C. AU - Chian, K. S. AU - Leong, K. F. PY - 2010 DA - 2010// TI - Cryogenic prototyping of chitosan scaffolds with controlled micro and macro architecture and their effect on in vivo neo-vascularization and cellular infiltration JO - J Biomed Mater Res A VL - 94 ID - Lim2010 ER - TY - JOUR AU - Fielding, G. A. AU - Bandyopadhyay, A. AU - Bose, S. PY - 2012 DA - 2012// TI - Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds JO - Dent Mater VL - 28 UR - https://doi.org/10.1016/j.dental.2011.09.010 DO - 10.1016/j.dental.2011.09.010 ID - Fielding2012 ER - TY - JOUR AU - Gao, L. AU - Li, C. AU - Chen, F. AU - Liu, C. PY - 2015 DA - 2015// TI - Fabrication and characterization of toughness-enhanced scaffolds comprising beta-TCP/POC using the freeform fabrication system with micro-droplet jetting JO - Biomed Mater VL - 10 UR - https://doi.org/10.1088/1748-6041/10/3/035009 DO - 10.1088/1748-6041/10/3/035009 ID - Gao2015 ER - TY - JOUR AU - Chang, C. H. AU - Lin, C. Y. AU - Liu, F. H. AU - Chen, M. H. AU - Lin, C. P. AU - Ho, H. N. AU - Liao, Y. S. PY - 2015 DA - 2015// TI - 3D printing bioceramic porous scaffolds with good mechanical property and cell affinity JO - PLoS ONE VL - 10 UR - https://doi.org/10.1371/journal.pone.0143713 DO - 10.1371/journal.pone.0143713 ID - Chang2015 ER - TY - JOUR AU - Tarafder, S. AU - Dernell, W. S. AU - Bandyopadhyay, A. AU - Bose, S. PY - 2015 DA - 2015// TI - SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model JO - J Biomed Mater Res B Appl Biomater VL - 103 UR - https://doi.org/10.1002/jbm.b.33239 DO - 10.1002/jbm.b.33239 ID - Tarafder2015 ER - TY - JOUR AU - Cox, S. C. AU - Thornby, J. A. AU - Gibbons, G. J. AU - Williams, M. A. AU - Mallick, K. K. PY - 2015 DA - 2015// TI - 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications JO - Mater Sci Eng C Mater Biol Appl VL - 47 UR - https://doi.org/10.1016/j.msec.2014.11.024 DO - 10.1016/j.msec.2014.11.024 ID - Cox2015 ER - TY - JOUR AU - Luo, Y. AU - Zhai, D. AU - Huan, Z. AU - Zhu, H. AU - Xia, L. AU - Chang, J. AU - Wu, C. PY - 2015 DA - 2015// TI - Three-dimensional printing of hollow-struts-packed bioceramic scaffolds for bone regeneration JO - ACS Appl Mater Interfaces VL - 7 UR - https://doi.org/10.1021/acsami.5b08911 DO - 10.1021/acsami.5b08911 ID - Luo2015 ER - TY - JOUR AU - Paulsen, S. J. AU - Miller, J. S. PY - 2015 DA - 2015// TI - Tissue vascularization through 3D printing: will technology bring us flow? JO - Dev Dyn VL - 244 UR - https://doi.org/10.1002/dvdy.24254 DO - 10.1002/dvdy.24254 ID - Paulsen2015 ER - TY - JOUR AU - Bose, S. V. S. AU - Bandyopadhyay, A. PY - 2013 DA - 2013// TI - Bone tissue engineering using 3D printing JO - Mater Today VL - 16 UR - https://doi.org/10.1016/j.mattod.2013.11.017 DO - 10.1016/j.mattod.2013.11.017 ID - Bose2013 ER - TY - JOUR AU - Xia, Y. AU - Zhou, P. AU - Cheng, X. AU - Xie, Y. AU - Liang, C. AU - Li, C. AU - Xu, S. PY - 2013 DA - 2013// TI - Selective laser sintering fabrication of nano-hydroxyapatite/poly-epsilon-caprolactone scaffolds for bone tissue engineering applications JO - Int J Nanomedicine VL - 8 ID - Xia2013 ER - TY - JOUR AU - Lee, J. W. AU - Choi, Y. J. AU - Yong, W. J. AU - Pati, F. AU - Shim, J. H. AU - Kang, K. S. AU - Kang, I. H. AU - Park, J. AU - Cho, D. W. PY - 2016 DA - 2016// TI - Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering JO - Biofabrication VL - 8 UR - https://doi.org/10.1088/1758-5090/8/1/015007 DO - 10.1088/1758-5090/8/1/015007 ID - Lee2016 ER -